How to maintain the car spare parts to prolong life?
Avoid heat
The temperature of the engine piston is too high, easily lead to overheating and melting holding cylinder; overheating rubber seals, triangle tape, tire, premature aging, decreased performance, shorten the service life; the coil overheating starter, generator, regulator and other electrical equipment, easily burned scrapped.
Anti avoidance
The engine cylinder gasket can not be reversed when it is installed, otherwise, it will cause premature damage of cylinder gasket. The installation of engine fan blades can not be reversed. For the tire with tyres, the ground mark after installing the tyres should make the herringbone pointing towards the rear part.
Avoid dirty
Fuel filter, oil filter, air filter, hydraulic oil filter screen and various parts such as if too dirty, will lead to the filtering effect of variation. Water radiator, air-cooled engine cylinder and cylinder head heat sink, cooler radiator and other parts are too dirty, resulting in bad heat dissipation and high temperature.
To avoid missing
The engine valve lock, should be installed in pairs, such as leakage or loss will lead to valve out of control and crashed the piston; engine connecting rod bolts, flywheel bolts, drive shaft bolts installed on the cotter pin, locking screws, insurance piece or a spring pad locking device, once the leakage will be in use, may lead to the occurrence of serious fault; oil jet engine timing gear chamber used to lubricate the gears once installed will lead to the serious leakage, oil leakage.
Avoid washing
The paper air filter for the engine can not be cleaned with any oil; for the parts of the cortex, it should not be cleaned with oil.
Avoid oil
Engine dry air filter paper filter, such as with oil, easy to make the mixture concentration high suction cylinder, the air volume, increase fuel consumption, engine power is reduced; if the belt is dipped in oil liquid, will accelerate the corrosion of aging; brake shoe, dry clutch friction plate and the brake band touch oil liquid, would threaten traffic safety. Tire rubber is very sensitive to corrosion of oil, and contact with oil can make rubber soft or desquamable.
To avoid the pressure
If the tire pressure is not timely and long-term storage of pile turning, will be distorted because of extrusion; air filter, fuel filter paper filter, such as extrusion, and not reliable to filter effect; rubber seals, triangle tape and tubing can not squeeze.
Avoid repetition
Some parts should be used for a single time. Some drivers or repairmen are saving or not using the taboo, which is easy to cause accidents.
Avoid fire
Tire, triangle belt, cylinder water, rubber seals and other rubber products, if near the fire, will be easily aged or damaged, on the other hand also may cause fire accident.
This article URL: http://www.jsyrj.com/en/news/369.html
Keywords: Automobilesheetmetalparts,Automobilestampingparts,Autoparts
Related Products:
Related news:
- What is the current situation of Chinas auto parts industry?
- How can the basic coating process be applied to the maintenance of automobile sheet metal parts?
- How should the vulnerable auto parts be maintained?
- How to distinguish the quality of the automobile sheet metal parts?
- What equipment will be used in the production of common auto parts?
- What is the current development of auto parts? (I)
- Do you know the difficulties in automobile stamping parts?
- How to choose the material of automobile stamping parts correctly?
- What is the mileage of the development of auto parts?
- What is the current development of auto parts? (two)